2. Adopting double head and double station locking screws, two electric drivers simultaneously lock two screws, resulting in higher efficiency
3. While locking the product at one workstation, loading or unloading operations can be completed at the other workstation, saving a lot of time
4. Program control: If there is a slip or jamming, the locking can be stopped or the position of the slip or jamming can be recorded. After all screws of the product are locked, it can be returned for re locking;
5. Good stability, no material jamming, even if poor quality causes material jamming, non professional personnel can solve the problem within a few seconds;
6. Key parts are made of high-quality hardware materials and undergo special treatment, and electronic components are imported with original packaging to ensure zero equipment failure;
Technical Parameter | ||
適用螺絲 | project | SW-4500 |
Tooth diameter | M1.0-M6.0mm | |
Aspect ratio | Total length L ≥ 1.2P Head diameter (screws with large head and short body) | |
Head shape | Cross, T-shaped, Y-shaped, hexagonal, pentagonal, triangular, beige shaped, and straight head screws | |
Working power supply | AC220V 50HZ 200W | |
Working air pressure | 5.5±0.5kg/cm2 | |
Upper limit of torque | 30kgf.cm(2.0N.m) | |
positioning accuracy | ±0.02mm/axis | |
running speed | 600mm/sec | |
Operation mode | PLC+High definition touch screen | |
Driving method | Servo motor (stepper closed-loop) | |
Motion module | Precision screw rod+linear slider | |
Storage capacity | At least 90 groups with 50 points per group | |
Feeding method | Air blowing feeding 0.35/piece (air suction feeding 0.5S/piece) | |
Applicable screwdriver | electric screwdriver | |
Effective whereabouts | 600（X）*300（Y）*100（Z）mm(可依產(chǎn)品定制) | |
Overall dimensions | 850（L）*820（W）*800（H）mm(可依產(chǎn)品定制) | |
Overall weight | 140kg | |
Detection function | Bad alarm for counting the number of missing locks on sliding teeth | |
